Saving Faces Changing Lives the Art of Maxillofacial Prosthodontics Case Series Comparing Two Different Materials
Main Article Content
Abstract
Surgical reconstruction of large facial defects is not possible at times due to extensive loss of tissues that cannot be corrected by surgery alone. In these cases, prosthetic restoration of lost facial tissues can be done using maxillofacial prostheses. Introduction of new material which gives life-like appearance to such prosthetic restorations e.g. silicone and poly ether rubbers and use of implants to retain these prostheses have given a new dimension to rehabilitation of such patients. However, in certain clinical scenarios, conventional acrylic resin prostheses are still the recommended options. This report discuss clinical performance of two cases of prosthetic rehabilitation of the nasal component of the face secondary to resection due to malignancy and due to infections using external device retained maxillofacial prosthesis.
Downloads
Article Details
Copyright (c) 2014 Ahmed B.

This work is licensed under a Creative Commons Attribution 4.0 International License.
Ahmed B, Mahmood A, Hussain M, Amin M, Yazdanie N (2010) Rehabilitation of nose using silicone based maxillofacial prosthesis. J Coll Physician Surg Pak 20: 65-67.
Futran ND, Mendez E (2006) Developments in reconstruction of midface and maxilla. Lancet Oncol 7: 249-258.
Bou C, Pomar P, Miquel JL, Poisson P (2006) [Maxillo-facialprostheses: an issue in public health]. Odontostomatol Trop 29: 34-40.
French, Goiato MC, Pesqueira AA, dos Santos DM, Antenucci RM, et al. (2008) Evaluation of dimensional change and detail reproduction in silicones for facial prostheses. Acta Odontol Latinoam 21: 85-88.
Mortellaro C, Garagiola U, Lucchina AG, Grivetto F, Milone G, et al. (2006) The use of silicon elastomer in maxillofacial rehabilitation as a substitute for or in conjunction with resins. J Craniofac Surg 17: 152-162.
Karayazgan B, Gunay Y, Evlioglu G (2003) Improved edge strength ina facial prosthesis by incorporation of tulle: a clinical report. J Prosthet Dent 90: 526-529.
Tsuji M, Noguchi N, Ihara K, Yamashita Y, Shikimori M, et al. (2004) Fabrication of a maxillofacial prosthesis using a computer-aided design and manufacturing system. J Prosthodontics 13: 179-183.
Ciocca L, Maremonti P, Bianchi B, Scotti R (2007) Maxillofacial rehabilitation after rhinectomy using two different treatment options: clinical reports. J Oral Rehabil 34: 311-315.
Ahmed B, Butt AM, Yazdanie N (2014) DENTAL HEALTH & QUALITY OF LIFE. ISBN No. 978-3-659-54719-5. Lambert Academic Publishing Germany 2014: 77-78.